All Partner Releases
Partner phones will work on the entire series of Partner phone systems. But for programming, you do need to know which release you do have.
If you have a Partner ACS, from any display phone, you can press, “Feature 59″, and it will display the release and firmware revision.
If nothing happens, it is an older Partner plus or Partner II. In that case you need to do a “beep test”:
To perform the test, access any phone line and press “feature #1″ You will hear a series of beep tones. Use the following to determine which Partner Processor you have.
Beeps System
1 Basic R1
3 Basic R2
1/3 BAsic R3.1
2/3 Basic R4
4/1 Basic R4.1
2 Partner Plus R1
4 Partner Plus R2
2/4 Partner Plus R3
1/2 Partner Plus R3.1
3/2 Partner Plus R4
4/2 Partner Plus R4.1
2/2/1 Partner II R1
2/2 Partner II R2
3/1 Partner II R3
1/4 Partner II R3.1
3/3 Partner II R4
3/4 Partner II R4.0.1
4/3 Partner II R4.4
5/1 ACS R1
5/2 ACS R2
5/3 ACS R3
5/4 ACS R4
5/5 ACS R5
5/6 ACS R6
5/7 ACS R7
Now you know which release you have, you can get the correct manual or support you need.
Discover more from IP Office Assistance
Subscribe to get the latest posts sent to your email.